Jointers

Shop Fox 8" Jointer w/ Parallelogram Adjustable Beds
$1,120.00
W1741
If you set out to design a full featured 8" Jointer, you couldn't do any better than this. Start with a 3 hp motor and a 4 knife cutterhead and then add a precision parallelogram table adjustment mechanism, extra long infeed table, large cast iron center mounted fence, pedestal mounted switch and a built in locking mobile base. Motor = 3hp 220v single phase Switch = magnetic w/ thermal overload protection Table Size = 8" x 76 5/16" Table = Precision Ground Cast Iron Infeed Table size = 8" x 43 3/8" Deluxe cast iron fence size = 35" L x 1 1/4" W x 5" H Cutterhead diameter = 3 3/16" Cutterhead Knives = 4 (HSS) 8" x 3/4" x 1/8" Cuts per minute = 19,600 Cutterhead speed = 4,900 RPM Max. Depth of cut = 1/8" Max Rabbetting depth = 1/2" Max width of cut = 8" Must ship via truck, delivery charge needs to be quoted.

Shop Fox 12" Heavy duty Jointer w/ Parralelogram Adjustable Beds
This large capacity Jointer, with its big cast iron fence, 83" long table and 12" cutting width make edge jointing and flattening wide stock a breeze. its parrallelogram table adjustment mechanism guarantees tables stay perfectly aligned to each other throughout their vertical range and a half ton of cast iron mass dampens any motor vibration for perfect results every time. Motor = 3hp 220v single phase 18A, 3450 RPM Switch = magnetic w/ thermal overload protection Table Size = 13" x 83" Table = Precision Ground Cast Iron Deluxe cast iron fence size = 47" L x 1 1/4" W x 5 3/8" H Cutterhead diameter = 3 3/4" Cutterhead Knives = 4 (HSS) 12" x 1 9/16" x 1/8" Cuts per minute = 19,800 Cutterhead speed = 4,950 RPM Max. Depth of cut = 1/8" Max Rabbetting depth = 3/4" Max width of cut = 12" Must ship via truck, delivery charge needs to be quoted.

Shop Fox 6" Jointer w/ Built in Mobile Base
$648.00
W1745
addition to our family of jointers has some of the most remarkable features found anywhere. Starting from the ground up: built-in "kick-stand" mobile base (just push the lever down, push the machine where you want it and kick the lever back up!), built-in dust chute with 4" dust collection hood, quick adjusting lever on the infeed table, fine control handwheel on the outfeed table, positive stop at 1/8" on the infeed table, large 5" x 35" cast iron fence, rack and pinion fence adjustment, and an easy access switch with a removable safety key. Specifications: Motor: 1 HP, 110V, 14A Single-phase Dust Port: 4" Maximum stock width: 6" Maximum depth of cut: 1/8" Maximum rabbeting capacity: 1/2" Cutterhead diameter: 2 1/2" Number of knives: 3 Cutterhead speed: 4800 RPM Table size: 6" x 46" Table height from floor: 32 1/2" Cuts per minute: 14, 400 Cutter head speed: 4800 RPM Fence size: 5"H x 35"L Fence adjustment: positive stops @ +/- 45 deg. & 90 deg. Foot Print: 18" x 13-1/2" Overall dimensions: 46"L x 27 1/2"W x 37 1/4"H Approximate shipping weight: 270 lbs. Features: Tables: Precision Ground Cast Iron Fence Assembly: Cast Iron Body Assembly: Cast Iron Stand: Preformed Steel Guard: Die Cast Metal Bearings: Sealed and Permanently Lubricated Ways: Dovetailed, Adjustable Base: Steel Center Mounted Fence Handwheel / Lever Table Raising Independently Adjustable Tables

Small Push Block
Our push blocks are constructed of high-impact molded plastic with natural rubber friction pads that grip the workpiece firmly. Woodworkers can work with confidence knowing that these blocks are between their fingers and the cutting tool. Bright, safety-orange color makes them easy to find and reminds woodworkers that safety comes first!

Shop Fox Heavy Duty Mobile Base
$69.95
D2057
The Shop Fox Adjustable Mobile bases are the first mobile bases designed strong enough to move heavy machines on a continual basis, be adjustable to fit a variety of machines and be leveled without the use the of shims or tools. Most shop floors are not perfectly level. To move the machine, you reach down and simply turn the knobs on the two plungers counter-clock wise to allow the weight of the machine to rest on the wheels, and then move the machine to the new location. To lock and level the machine, simply turn the plunger knobs clockwise until locked and level. The Shop Fox® bases are made with the heaviest gauge steel of any of the mobile bases on the market. In most cases, the thickness of steel used is twice that of other mobile bases. These are the first industrial quality mobile bases to be made available at an affordable price!Adjusts from 19" x 20 -1/2" to 29 -1/2" x 29 -1/2" to fit most machines A substantial 600 lb. capacity to easily handle most of the popular machines 4 Heavy-Duty 3" Industrial Grade Casters - 2 ball bearing swivel and 2 stationary Engineered with heavy duty steel (up to 1/4" thick) for exceptional strength Designed for long term and frequent moving of heavy machinery Patent Pending