Clamps

Bessey Revo K Body Clamps

Bessey Bar Clamps

Bessey One Hand Edge Clamp
$54.99
BEKT-55
The Bessey Professional One Hand Edge Clamp was developed with the production and custom woodworker in mind. It features a compound screw mechanism which allows the operator to simultaneously engage the top and bottom pressure pads while applying pressure to the front edge of a counter top. All three pressure surfaces are advanced with the turn of a single handle. The cushioned pads firmly grip without slipping or damaging the work surface. This clamp has a maximum clamping pressure of 500 lbs. and can accommodate counter top thicknesses of up to 2 1/4 inch. Unlike similar edge clamps, the Professional One Hand Edge Clamp is equal effective with any top thickness. It can be used to apply edges to counter tops, tables, shelves or in any operation where three-way pressure is required. The Bessey Professional One Hand Edge Clamp works beautifully when applying solid wood edging into straight edged counter tops, and really performs when bending solid wood edging onto curves. The Bessey Professional One Hand Clamp is lightweight, rugged and affordable. No other edge clamp on the market features truly a single handed operation or performs as well as the Bessey EKT-55, Professional One Hand Edge Clamp. Once again, Bessey has proved its mastery of hand clamping technology and delivered the woodworker another Bessey winner.

All in One Clamp Contractor Series 24"
Expertly engineered, the Contractor Series possess some very unique design features. Integral tubes that run the length of the wide body construction make it possible for the Contractor Clamp to be ultra rigid as well as ultra light. With an extra low profile and a flat top the Contractor Series can be used with bearing shank router bits in addition special design allows for use in joiner operations. Available in the most popular three sizes 24”, 50” and 99” the All In One Contractor Clamp will find itself to be one of the most valuable and useful tools in the workshop or work truck.

Woodpeckers M2 Box Clamps
$39.99
WPM2

Introducing Woodpeckers newest clamping accessory; the BC4-M2 Box Clamp. This simple device eliminates the hassle of using heavy, expensive bar clamps for assembling boxes, drawers and especially full size cabinets. Imagine being able to dry-fit and square up all your parts at the same time without any bulky clamps and before having to use any glue, screws or nails. You'll know right from the start if what your building will assemble to the final dimensions, be as square as you need or if minor trim cuts are necessary. You can do all of that without a second set of hands to hold pieces in place while getting a bar clamp in position and tightened up. Not only that but once your project is held together with the Box Clamps, you can immediately install any type of screws (even pocket screws) or nails because all of the corner joints are left fully accessible. There's nothing to get in your way. Woodpeckers Box Clamps are designed for any 90 degree joint including butt joints, lap joints, T-joints, miter joints, box joints, dovetails and more even if material is extending past the face. Ever try to use a bar clamp to assemble a box joint or dovetail? It doesn't work well. It's almost impossible to keep even one joint square with the uneven clamping typical of a bar clamp. Getting just one corner right is hard enough let alone all four at the same time. The clamp will accommodate materials from 1/4 up to 1 inch in thickness. The MC4-M2 Box Clamp is molded from a special combination of glass reinforced poly carbonate. It's virtually indestructible and not a light weight; each clamp weighs over a half pound and comes with hardware for both hand as well as fixture use. Sold in pairs. Made in U.S.A.

Woodpeckers Clamping Square
$34.99
WPCS6075X2
Cutting material perfectly square is one thing, getting that to show up in the finished product after assembly is quite another. Over the centuries, woodworkers have devised countless methods for getting the box, drawer or cabinet perfectly square while it's nailed, screwed, glued or all of the above. In the end, nothing any more complicated then something square to clamp your material against is all that's needed. So in an interest to offer woodworkers a strong, solid, accurate solution, we decided to machine these 6” solid aluminum clamping squares. Each square is carefully machined, not molded, stamped or bent, into a ¾” thick, 1” wide, 6” x 6” square. All edges are chamfered, all surfaced buffed, and the whole thing anodized to prevent staining interaction with glue. Of course there's always cheaper ways to make anything, but that's not what Woodpeckers is about. To make it even more useful, four counter bored holes are strategically located for fixturing. What that means is you can temporarily, or permanently, attach this clamping square to your bench top or other material to further aid in project assembly, especially when you're working by yourself. They'll not only work inside a box, under or over a shelf but also around the outside corner. We guarantee these Precision Clamping Squares to be flat, square and true, or we'll gladly replace them. Give them a try, you'll be surprised just how much better and easier your projects come together.